1. Product Name
EDWARD ( ED ) PX600 P01733 Ternary Type Disposable IBP Transducer
Blood Pressure Transducer for IBP Adapter Cable
2. Feature Of Disposable IBP Transducer
Accuracy for your patients
Our standard disposable IBP blood pressure monitoring transducer
kits are sterile, single-use kits that relay blood pressure
information from a pressure monitoring catheter to a patient
monitoring system. disposable IBP transducer kits can be paired
with the VAMP (Venous Arterial Blood Management Protection) system
for a single safe, reliable and accurate monitoring solution.
Available in multiple configurations to meet your clinical needs
Design features a straight fluid path across the pressure sensor
for easy priming and minimal waveform distortion
Gold plated connector wires for high fidelity signal transfer
Snap-tab flush device designed for easy priming and square-wave
testing
3. Technical Parameters
1. Barometric pressure: 70~106Kpa Relative
2.Humidity: 10~90% (non-condensing)
3.Operating pressure range: -50 ~ + 300 mmHg
4.Sensitivity: 5.0μV/V/mmHg ±3%
5.Nonlinearity and hysteresis: full-scale reading±1.5%
6.Input impedance: 1200Ω ~3200Ω
7.Output impedance: 300±5%
8.Zero pressure offset: -20mmHg~+20mmHg
9.Thermal offset shift: ≤±0.3mmHg/°C
10.Offset drift: After warm-up for 20 seconds, drift within 2 mmHg
within 8 hours
11.Thermal span shift: ≤±0.1%/°C
12.Frequency response: Standard pressure set (48 "/ 12") is 40 Hz;
Separate sensor > 200 Hz
13.Defibrillator withstand: Defibrillation depends on the final
connection of the equipment.
14.Leakage current: Leakage current is dependent on the final
connection of the equipment
15.Overpressure load: -400~+4000mmHg
16.Shock resistance : Withstand falling from one meter for three
times
17.Light sensitivity: When exposed to a 3400°K tungsten light,
candle light at 3000 feet, it's less than 1 mmHg under rated
voltage.
18.Contact with the human body: ≤96h
19.Storage and transport environment requirements: - 20 ° C~ + 60 °
C, < 90%(non-condensing), no corrosive gas and indoor
ventilation, and to avoid high temperature and cold.
20. Product shelf-life: 3 years.
4. Other Models :
Manufacturer | OEM Part # |
DRE | P01733 |
Edwards | PX600 |
REF | Sensor Desription |
BIY-ED-01 | Single Type EDWARD ED Connector |
BIY-ED-02 | Dual Type EDWARD ED Connector |
BIY-ED-03 | Ternary Type EDWARD ED Connector |
5. Company Product :
Reusable SpO2 Sensor
Disposable SpO2 Sensor
SpO2 Adapter Cable
ECG Cable and Leadwires
EKG Cable and Leadwires
ECG Holter Cablel and Leadwires
ECG Trunck Cable 3/5/10 Lead
ECG Leadwires 3/5/10Lead
ECG Electrodes and ECG/EKG Accessories
Radiatranparent ECG Cable and Leadwires
Temperature Probe and Adapter Cable
IBP Cable and Adapter Cable and Disposable IBP Transducer
NIBP Cuff and NIBP Adapter Hose Tube
EEG Electrodes Leadwires
Spare parts and semi-sinished cables
6. Certificates
7. Delivery details:
1) Our production cycle:
Item will be shipped within 4-7 working days after we get your
Payment, We are always serious on the delivery time, all orders
will be checked by us carefully to make sure there is no delay on
the shipment.
2) Shipping Methods:
a).we usually send goods by DHL,Fedex,TNT,UPS, Tracking number will
be advised after delivery, all of express lead time is about 5-7
working days.
b). If order is big, we will suggest you use Air Freight or Sea
freight.
8. About Sample
1) if we have the product you need , we can send you the sample
free
2) if we have not the product you need, we advice you send us one
piece of sample,
We will check how to produce it for you .
9. FAQ
Q: Are you trading company or manufacturer?
A: We are original manufacturer. We can do OEM/ODM business.
Q: What is your terms of payment and way of payment?
A: 100% payment in advance. Payment by TT/Western
Union/Paypal/Alibaba/Ali pay/Wechat /L/C(some countries )are
acceptable.
Q: How to buy your products?
A: You can buy the products from our company directly.Normally the
procedure is sign the contract, make payment,Contact the courier to
deliver goods .
Q:Can your provide customize or OEM service?
A: 1. We can add customer's logo on the product or package if
samples or design is provided.
2. We can provide design service or manufacture if sample or design
is provided.
Q: Can we become your distributor in local?
A: Yes ,We are looking for distributors in every country or region
.If you are interested in distribution ,you can email us freely.
