Home > IBP Transducer >

PVB IBP Transducer PB Single Type Disposable Transducer Invasive Blood Pressure

Product Categories

Shenzhen Best Electronics Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

PVB IBP Transducer PB Single Type Disposable Transducer Invasive Blood Pressure

Ask Lasest Price
Brand Name :	Coyinmed
Model Number :	BIY-PB-01
Certification :	CE ＆ ISO 13485
Price :	10-30USD Each
Payment Terms :	Western Union, MoneyGram, L/C, T/T

Add to Cart

Product Details
Company Profile

PVB IBP Transducer PB Single Type Disposable Transducer Invasive Blood Pressure

Disposable IBP transducers typically consist of a small, flexible catheter that is inserted into an artery, and a transducer that is attached to the end of the catheter. The transducer converts the pressure inside the artery into an electrical signal, which is then transmitted to a monitor that displays the patient's blood pressure in real time.

1. Product Name

PVB PB Single Type Disposable IBP Transducer

2. Technical Parameters

Main technical parameters and working environment requirements:
Disposable Pressure Transducer
Barometric pressure	70~106Kpa
Relative humidity	10~90% (non-condensing)
Operating pressure range	-50 ~ + 300 mmHg
Sensitivity	5.0μV/V/mmHg ±3%
Nonlinearity and hysteresis	full-scale reading±1.5%
Input impedance	1200Ω ~3200Ω
Zero pressure offset	-20mmHg~+20mmHg
Thermal offset shift	≤±0.3mmHg/°C
Offset drift	After warm-up for 20 seconds, drift within 2 mmHg within 8 hours
Thermal span shift	≤±0.1%/°C
Frequency response	Standard pressure set (48 "/ 12") is 40 Hz; Separate sensor > 200 Hz
Defibrillator withstand	Defibrillation depends on the final connection of the equipment.
Leakage current	Leakage current is dependent on the final connection of the equipment
Overpressure load	-400~+4000mmHg
Shock resistance	Withstand falling from one meter for three times
Light sensitivity	When exposed to a 3400°K tungsten light, candle light at 3000 feet, it's less than 1 mmHg under rated voltage.
Storage and transport environment requirements	- 20 ° C~ + 60 ° C, < 90%(non-condensing), no corrosive gas and indoor ventilation, and to avoid high temperature and cold.
Contact with the human body	≤168h
Intra-system velocity
Flow	2-5mL/h
Intra-system refers to the velocity under 6.00 VDC and 25°C, unless there are additional instructions.

3. Other Models :

REF	Sensor Desription
BIY-PB-01	Single Type PVB(PB) Connector
BIY-PB-02	Dual Type PVB(PB) Connector
BIY-PB-03	Ternary Type PVB(PB) Connector

4. Certificates

PVB IBP Transducer PB Single Type Disposable Transducer Invasive Blood Pressure

5. Delivery details:
1) Our production cycle:
Item will be shipped within 4-7 working days after we get your Payment, We are always serious on the delivery time, all orders will be checked by us carefully to make sure there is no delay on the shipment.

2) Shipping Methods:
a).we usually send goods by DHL,Fedex,TNT,UPS, Tracking number will be advised after delivery, all of express lead time is about 5-7 working days.
b). If order is big, we will suggest you use Air Freight or Sea freight.

6. About Sample
1) if we have the product you need , we can send you the sample free
2) if we have not the product you need, we advice you send us one piece of sample,
We will check how to produce it for you .

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Best Electronics Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!